JT2088L, Diezoresistive Silicon Intelligent Circuit Board
  • JT2088L, Diezoresistive Silicon Intelligent Circuit Board

JT2088L, Diezoresistive Silicon Intelligent Circuit Board



JT2088L Diezoresistive Silicon Intelligent Circuit Board replaced the original 4~20mA analog board. With the main body of Microcontrollers CPU, JT2088L is capable to do logical operation and programming. It combines analog and digital circuit in one machine, so is able to output analog signal as well as digital signal. Parameters configuration and compensation of transmitters can be done by buttons on LCD module and internal debugging program. JT2088L supports standard diffused silicon, strain gauge,piezoresistive ceramic pressure sensors. It is suited for JT2088L housing.


1.Two wires working mode provides sensors with two exciting ways - constant current and constant voltage.

2. Calibrating as per full scale realizes bulk production

3.Easy to do temperature compensation, under -20~70℃ the complete machine accuracy better than 0.5% (including accuracy of sensors)

4.Three points calibrating, complete machine accuracy better than 0.2%. Multi-point calibrating is available as required.

5.AD accuracy > 20 bits, DA accuracy > 16 bits;

6.span can be changed on-site by LCD module buttons without standard pressure source

7.Small signal wiping off and reset function

8.LCD head is available to use once connected with sensor, free from calibration. And the head is dismountable, customers could equip LCD indicator or not.


Technical parameters:

Supply power

DC9-32V (DC 24V is suggested)

Constant current excitation

0.4mA(suitable for diffused silicon, strain gauge sensors)

Constant voltage excitation

2.5VDC(suitable for piezoresistive ceramic pressure sensors)

Sampling rate


Displaying and bits

LCD with backlight, displaying 5 bits, and 4 decimal places

Displaying units

Ten displaying units as KPa, Pa, MPa, mmH2O, mH2O, mbar, bar, PSI, M,%

Output resolution


Temp. compensation accuracy

-20~70℃ complete machine accuracy is better than 0.5% (including accuracy of sensor)

Linearity accuracy

Complete machine linearity is better than 0.2% (Multi-point calibrating is available as required)



Range ratio


Circuit protection Measurement

 surge current protection, reverse power protection

Circuit design

Intrinsic safety

Isolation range


Communication Protocol

Private protocol

Adjusting method

by buttons on LCD head or program on pc


OD=52.4mm, Mounting hole pitch=44mm (suited for pressure and level transmitter in JT2088L housing)

Motherboard buttons operation

reset, lower range calibration(zero drift under pressure source), upper range calibration (full scale calibration)

LCD head buttons operation

changing span units, decimal place, output features, changing damping time, currant fixing, write-protection,factory reset and zero clearing



  • Company Name:Hefei WNK Smart Technology Co., Ltd
  • Add:5F, Bldg 2A-2B, Mingzhu Industrial Park,  Intersection of Mingzhu Ave and ChuangXin Ave, High-Tech Zone Hefei 230000, China
  • Contact:WNK
  • Mob:+86-18156545248
  • Tel:
  • Email:[email protected]